PyCom

For use with Sigfox/LoRa/External WiFi Antenna sold on this site. Includes Nut, washer and rubber ring. Ideal for use with IP67 cases.

External WiFi and antenna cable (non-IP67). Includes antenna, cable, washer and nut.

PyCase can hold either LoPy, WiPy, FiPy, SiPy or GPy with an expansion board and attached antenna.

External LTE-M Antenna Kit for use with the FiPy and GPy development boards.

External LoRa and Sigfox antenna. Can be used with either the LoPy4, SiPy or FiPy.

Meet our new Pygate case. It will fit your Pygate in perfectly. It’s a translucent smokey colour, made from a polycarbonate material. Pygate is an 8-channel LoRaWAN gateway. Connect your WiPy 3.0, LoPy4 and GPy and hook up any other Pycom devices and voila – a decentralized IoT network.

NOTE:
* Please note purchasing the case does not include Pygate or the antenna connectors displayed on the photo.

External LTE-M Antenna Kit for use with the FiPy and GPy development boards.

External GPS/Glonass antenna and cable. Includes antenna, cable assembly with nut and magnet (with base sticker) to attach GPS antenna to external metal surfaces.

This GPS antenna has been optimised to work with the NEW Pytrack 2.0 X shield.

Pytrack 2.0 X shield is NOT included

The Universal IP67 Case is Pycom’s very own universal waterproof case, with push-in tabs that fit accessory sensors perfectly, creating a water tight seal. Two holes go straight through the case without penetrating the inner compartment, meaning you can fix the case securely in place.

The case features perfectly sized spacing for a Pycom expansion board or sensor shield, a Pycom module and battery, plus sensors.
Please note that whilst the IP67 case has pre-cut holes (which are water resistant until you pop these out), you may need to use some sealant should you drill out the hole and make the case watertight.

Our enterprise-grade IoT development board.

Micropython enabled, with a 1km WiFi range and Bluetooth capabilities. It works using a state-of-the-art Espressif ESP32 chipset and dual processsor.

Connecting via USB? Please purchase the Expansion Board 3.0, Pysense or Pytrack.

Introducing the Expansion Board 3.0, compatible with the WiPy 3.0, LoPy4, SiPy, FiPy and GPy.

Pysense 2.0 X is a new sensor shield which can be used with any Pycom multi-network modules. It fits with all Pycom boards and contains a number of sensors, such as ambient light, pressure and humidity. It’s got a ton of new features including a 6 Pin connector for the new Pynode sensor range too.

This small accessory shield adds Power over Ethernet for the new Pygate 8-Channel LoRa gateway.

Pyscan is a sensor shield you can use with any Pycom multi-network development boards. Featuring an accelerometer, light sensor and RFID-NFC (NFC antenna is included with purchase).

Pytrack 2.0 X is a NEW sensor shield that can be used with any Pycom multi-network modules. It contains a number of sensors, such as an accelerometer and GPS. It now has a 6 Pin connector for the new Pynode sensor range too.

One year of Sigfox connectivity included

The LoPy4 is Micropython-programmable quadruple bearer board. It works with LoRa, Sigfox, WiFi and Bluetooth, making it an exceptional enterprise-grade IoT platform.

If you are purchasing the LoPy4 and wish to connect via USB to your computer, you will also need to purchase either the Expansion Board 2.0, Pysense or Pytrack.

Pygate is an 8-channel LoRaWAN gateway. Connect your WiPy 3.0, LoPy4 and GPy and hook up any other Pycom devices and voila – a decentralised IoT network.

NOTE: Just add a WiPy, LoPy4 or GPy to provide the processing capabilities as well as the ability to connect to the Internet, radio control and baseband processing.

UPGRADED CALIBRATION AND EXTENDED BANDS

The GPy is our Micropython-programmable triple bearer. Different from its SiPy counterpart, the GPy offers WiFI, BLE and cellular CAT-M1/NB1. Create and connect your things everywhere.

NOTE: The Cellular Antenna MUST always be used with LTE CAT-M1/NB1 or the board could become seriously damaged.

UPGRADED CALIBRATION AND EXTENDED BANDS

Five networks in one small board; the Micropython-programmable FiPy takes up the same footprint as our other boards. Featuring WiFi, Bluetooth, LoRa, Sigfox and dual LTE-M (CAT-M1 and NB-IoT), the FiPy gives access to global LPWAN networks.

NOTE: The LTE Antenna MUST always be used with LTE CAT M1 / NB1, or it could cause serious damage to the development board.